8 Solution To Fix Error Code B200 Canon MX892 Printer [Success]


How To Fix Error Code B200 Canon MX892

When you regarding error code B200 Canon MX870 Multifunction printer. It usually occurs with the print head overheating or has been died.

There are several solution to fix this problems like remove and replacing print head, replace cartridge, reset print head and turn off the printer and open the print cover.

This tutorials will guide you about how to fix error code B200 Canon MX892 printer.

How To Fix Error Code B200 Canon MX922 Printer

Please try the following solution to see to resolve your issue:

How To Fix Error Code B200 Canon MX892

Solution 1 :

  1. Remove and clean your print head
  2. Clean printhead connectors with cue tips and alcohol.
  3. Before powering on your printer, be sure that the connectors are completely dry.
  4. Press the power button rapidly to start the reboot mode on the printer

Solution 2 :

  1. Reset your print head
  2. turn off your printer and leave it turned off for a minutes.
  3. turn your printer back on and check if the problem is resolved

Solution 3 :

  1. Turn Off the printer
  2. Open the print head
  3. turn the printer back on
  4. Cartridges will start moving to the left. Before the cartridges reach the left side, close down the printer cover and leave the printer turned on

Solution 4:

  1. Take out all of the ink cartridges
  2. Lift up the grey bar by where the ink goes
  3. Left the print head in the middle of the printer all while the printer was off.
  4. Clean the plastic head primers/cleaners themselves on the printer

Solution 5:

  1. Replace the problematic cartridge
  2. Check your printer manually when you want to replace cartridge

Solution 6:

  1. Check for obstraction
  2. You need to power down your printer,
  3. Remove the paper and check for any obstructions

Solution 7:

  1. Press the power and copy button on your printer
  2. Wait for couple of times
  3. After doing that, the printer should start and you just need to perform a nozzle check

Solution 8:

  1. Unplug your printer

When you occurs error code B200 with your canon printer you should be able to fix it by using one of our solutions. It benefits to prevent you from problem printing.


Please enter your comment!
Please enter your name here